![]() To change the order of preference, select the headset you want to use and press the arrow button on the right-hand side to move your preference.īelow example is that of the Speaker but the Microphone and Ringer/Alerts preferences can also be changed the same way.ĥ. The check on the right side of the audio devices represents the devices that you are currently using.Ĥ. From the Advanced audio options window, PC's defaulted devices are selected. On the left side of the options screen, select the audio and press the Advanced > button on the bottom right.ģ. Start Jabber for Windows application and after the sign-in, select the cog's drop-down menu, Options > Audio.Ģ. The Speaker, Microphone, and Ringer/Alerts device settings are, by default, already chosen though your PC settings so you will chose options for Jabber.ġ. (These screenshots are for Windows - but I'm sure Mac looks very similar.) Make sure you do not select your modem.Jabber has options where you can choose your Speaker, Microphone and Ringer/Alerts devices. Otherwise select your sound card from the list.If you are using on board sound just choose default. Ensure the correct Record Device is selected.Close all settings windows and run the NCH product you wish to record through.If your Microphone Input has an "Advanced" button next to it you may wish at this point to Click advanced -> Select Microphone Boost -> Click Close.Also make sure volumes for the Inputs you are not using are turned down.If you see "Mute" boxes instead of "Select", check all Mute boxes other than Microphone. ![]() Ensure that the "Select" box is ticked under the Microphone (or Line In) input and that the volume is turned up all the way.Adjusting the Windows Audio Recording Settings.You can switch to this window by:Ĭlicking 'Options' in the top toolbar -> Click 'Properties'-> Select the 'Recording' box under the heading 'Adjust Volume for' -> Click 'Okay' We need the recording control window to adjust the recording volume. The volume control window adjust the playback volume. It is likely that after completing one of the processes above you will have opened the volume control window and not the recording control window. Making sure you have the Recording Control Window open.You can open the windows audio Settings in several ways:ĭouble click the audio tray icon represented by the speakerĬlick Start -> Click Run -> Type sndvol32.exe /recĬlick Start -> Click Control Panel -> Click Sounds and Audio Devices -> Click Advanced Opening the Windows Audio Recording Settings window.If you are using a microphone built into your computer skip to the section "Windows Audio Settings" ![]() If you cannot establish which one to use you can find it by trial and error. The sockets will be labelled so if they are not colored you will be able to see a microphone symbol (for the microphone socket) or an arrow pointing downwards (for the line in socket). On lower quality sound cards there may be only two sockets, one for speaker out and one for line in. The socket you want to plug the microphone into is usually pink (microphone) and located next to two other sockets one green (speakers) and the other blue (line in). The sockets are on your sound card are located at the back of your computer, but can occasionally be found on the front. If you are using an external Microphone, you must first plug this microphone into your computer. Microphone and Voice Recording Set Up Tutorial Microphone and Voice Recording Set Up Tutorial Types of Microphones
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |